BMZYG - E-340 PART A
- MSDS: BMZYG
- Manufacturer: FLAMEMASTER CORP
- Product Name: E-340 PART A
- National Stock Number: 8030-01-032-1749
Product Identification
Product ID:E-340 PART A
MSDS Date:01/20/1992
FSC:8030
NIIN:01-032-1749
MSDS Number: BMZYG
Responsible Party
SUN VALLEY, CA 91352-4949
US
Emergency Phone: 800-424-9300 (CHEMTREC)
Info Phone: 818-982-1650
Preparer: HERBERT MOORE
Cage: 14439
Contractor
Telephone: 818-982-1650
Cage: 14439
Ingredients
BISPHENOL A DIGLYCIDYL ETHER RESIN
CAS: 25068-38-6
RTECS: SL6475000
Fraction By Weight: 17%
N-BUTYLGLYCIDYL ETHER
CAS: 2426-08-6
RTECS: TX4200000
Fraction By Weight: 2%
OSHA PEL 50 PPM
ACGIH TLV: 25 PPM; 9293
VOLATILE ORGANIC COMPOUND (VOC) 9 G/LITER
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:FOR SENSITIVE INDIVIDUALS, REDNESS &
ITCHING OF SKIN MAY OCCUR ON REPEATED EXPOSURE. DERMATITIS MAY
RESULT FROM PROLONGED OR FREQUENT CONTACT.
Effects of Overexposure:EYE IRRITATION WITH TEARING & REDNESS. ITCHING
& REDNESS OF SKIN.
Medical Cond Aggravated by Exposure:EZEMA OR PREVIOUS SKIN IRRITATION
OR ALERGY.
First Aid
First Aid:EYES-FLUSH WITH FLOWING WATER FOR AT LEAST 15 MINUTES, OBTAIN
MEDICAL ATTENTION. SKIN-WASH WITH SOAP AND WATER. INGESTION-CONTACT
PHYSICIAN.
Fire Fighting
Flash Point Method:TCC
Flash Point:200F,93C
Extinguishing Media:FOAM, DRY CHEMICAL, WATER SPRAY, CO2.
Fire Fighting Procedures:IN CONFINED AREAS WEAR SELF-CONTAINED
BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:SCOOP UP & RETURN TO CONTAINER. REMOVE RESIDUE
WITH SOAP AND WATER, 1,1,1, TRICHLOROETHANE OR METHYL ETHYL KETONE.
Neutralizing Agent:AMINES, ORGANIC ACIDS
Handling
Handling and Storage Precautions:STORE IN COOL DRY AREAS AWAY FROM
DIRECT SUNLIGHT. KEEP IN CLOSED CONTAINERS.
Other Precautions:AVOID CONTACT WITH SKIN, EYES & CLOTHING. WASH
CONTAMINATED CLOTHING BEFORE REUSE.
Exposure Controls
Respiratory Protection:MSHA/NIOSH APPROVED ORGANIC VAPOR RESPIRATORS
FOR HOT MATERIAL.
Ventilation:LOCAL EXHAUST; HOOD, MECHANICAL (GENERAL); FAN
Protective Gloves:NITRILE OR NEOPRENE
Eye Protection:SAFETY GLASSES WITH SPLASH GUARD.
Other Protective Equipment:APRON, SAFETY SHOES, EYE WASH STATION.
Work Hygienic Practices:DO NOT SMOKE, DRINK OR EAT IN WORK AREAS.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:>400F,>204C
Melt/Freeze Pt:M.P/F.P Text:ROOM TEMP
Decomp Temp:Decomp Text:ABOVE BOIL
Vapor Pres:< 1
Vapor Density:> 1
Spec Gravity:1.48
pH:6.5
Evaporation Rate & Reference:0.1 BUTYL ACETATE = 1
Solubility in Water:SLIGHT
Appearance and Odor:DECK GRAY, OLIVE DRAB, FOREST GREEN, ESTER ODOR
Percent Volatiles by Volume:0.90
Stability
Stability Indicator/Materials to Avoid:YES
BASE COMPOUNDS, AMINES
Stability Condition to Avoid:HIGH HEAT
Hazardous Decomposition Products:ALDEHYDES, CARBON MONOXIDE, CARBON
DIOXIDE, PHENOLICS, SOOT.
Conditions to Avoid Polymerization:STRONG BASES
Disposal
Waste Disposal Methods:REACT WITH CURING AGENT & DISPOSE AS
NON-HAZARDOUS SOLID, ACCORDING TO LOCAL, STATE & FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.